This page looks plain and unstyled because you're using a non-standard compliant browser. To see it in its best form, please upgrade to a browser that supports web standards. It's free and painless.

Blog About Dedicated Servers

Easy CURL 7.10.4 w/SSL

Luigi Ramone | 15 December, 2005 21:35

We've put together these RPM's for libcurl 7.10.2 with SSL support. They upgrade over the stock RH ones. Installation is via rpm -Uvh

Applicability (RH 7.2 / 7.3 required) :

Webppliance 3.1
Webppliance Pro 3.5
cPanel 6
Plesk 5.0

These are also Modernbill compatible on all above panel types.

 (More)

Cpanel , RedHat , Ensim , Plesk , Webppliance :: Comment (106) :: Permalink :: Trackbacks (0)

APF Firewall 0.9.4-7

Luigi Ramone | 15 December, 2005 21:32

Just thought I'd update the howto's for APF.

Type ifconfig

Find out if it’s using eth0 or eth1.

Usually its eth0 but if its not, change it in conf.apf or you’ll be completely blocking the server from access

wget http://www.rfxnetworks.com/downloads/apf-current.tar.gz

tar -xvzf apf-current.tar.gz
cd apf*
./install.sh
pico -w /etc/apf/conf.apf

RESV_DNS="1"

All SYSCTL options should be set to 1 EXCEPT for
SYSCTL_OVERFLOW="0"
SYSCTL_SYNCOOKIES="0"

USE_DS="1"
USE_AD="1"

 (More)

Cpanel , Security , Plesk :: Comment (111) :: Permalink :: Trackbacks (0)

Install/Upgrade ProFTPd

Luigi Ramone | 15 December, 2005 21:22

Ensim
I'm not going to handle Ensim again since gpan made a nice Howto on this issue and even created
rpms for your usage all information can be found here.
After installing it you can also do the proftpd.conf tweak but you have todo pico -w /etc/proftpd.conf
note:
1. that i can't give any support on the rpm made by gpan, so that will have to go through him.
2. Mouse is against upgrading your ProFTPd on Ensim when you run a up to date 3.1.x and 3.5.x

Plesk
Nighthawk just said to me that this is actually a bad idea for Plesk.
Nighthawk has years of experience with Plesk so i fully support what he's saying about Plesk whatsoever .
So your officially warned by me and NightHawk so dont do this howto on your system.
You will destroy it otherwise but you can do the proftpd.conf tweak without a problem, so just skip most of this how-to and usage pico -w /etc/proftpd.conf instead just like Ensim.

 (More)

System , Ensim , Plesk :: Comment (98) :: Permalink :: Trackbacks (0)

Powered by Boonic, Bloogo & pLog
This Blog does not have any affiliation nor relation with the mentioned companies. All the logotipos, trade names and images are property of the companies that registered them.